Basic2nd-recovery-system.zip -24 6 Mb- !!install!! May 2026

Power on the device. It should automatically detect the recovery files and boot into a specialized "Maintenance Mode" screen.

The recovery system is compatible with the following Siemens 2nd Generation Basic Panels: KTP700 Basic / KTP700 Basic DP KTP900 Basic KTP1200 Basic / KTP1200 Basic DP How to Use the Recovery System basic2nd-recovery-system.zip -24 6 mb-

: The zip file itself contains the recovery environment but not the specific firmware image for your panel. You must copy the appropriate .fwf image file from your TIA Portal installation directory (typically under \Data\Hmi\Transfer\Images ) into the \SIMATIC.HMI\Recovery\ folder on the USB stick. Boot into Recovery : Power off the HMI device. Insert the USB stick into the HMI's USB port. Power on the device

: Follow the on-screen prompts. Most models require you to press the "START RECOVERY" button three times to confirm the action. You must copy the appropriate

Passwords or network settings prevent standard communication. Supported Devices

This recovery system is designed for "USB Recovery Mode," allowing engineers to restore a panel to its original out-of-the-box state. This is often necessary if: The HMI panel's operating system is corrupted. The device is stuck in a boot loop.