Br 3021 Shock Manual Here

Full factory service. Replace all seals and change the internal damping oil. ❓ Troubleshooting Potential Cause Excessive Bottoming Air pressure too low Increase PSI in 10-unit increments Oil Leaking from Knobs Damaged internal seals Requires professional service Squeaking Noise Dry air seals Apply suspension-specific lube to the stanchion Loss of Lockout Low oil volume or air in oil Full damper bleed required AI responses may include mistakes. Learn more

Turn clockwise if the bike feels "bouncy" or like a pogo stick.

Perform a basic air sleeve service. Clean the internal seals and re-lubricate with dynamic seal grease. br 3021 shock manual

The BR 3021 is a high-performance mountain bike rear shock designed for durability and precision tuning. This manual provides the essential instructions for installation, air pressure adjustment, damping settings, and routine maintenance to ensure your suspension performs optimally on the trail.

Tighten bolts to the manufacturer’s torque spec (usually 10-12 Nm). 2. Setting Air Pressure (SAG) Full factory service

SAG is the amount the shock compresses under your body weight. For the BR 3021, aim for . Slide the O-ring against the shock body. Sit on the bike in full riding gear without bouncing. Gently dismount and measure the distance the O-ring moved. To increase SAG: Release air via the Schrader valve. To decrease SAG: Add air using a high-pressure shock pump. 🔄 Adjustment Guide Rebound Damping (Red Knob)

Restricts movement for efficient climbing on fire roads or pavement. 🧰 Maintenance Schedule To keep the BR 3021 smooth, follow this service interval: Learn more Turn clockwise if the bike feels

Air Spring, Rebound, and Compression Lockout Fluid Type: 7wt or 10wt High-Performance Suspension Oil Mounting Hardware: 8mm x 22mm (Standard) Weight: ~265g (depending on size) ⚙️ Initial Setup and Installation 1. Mounting the Shock Ensure the frame’s mounting points are clean.