Connect the data cable from the PCI card to the CNC control cabinet. 2. Software Setup and Driver Configuration
For the machine to "work" correctly, you must input manufacturer-specific parameters. These are often password-protected; the default password is often . Weihong NcStudio CNC Controller V5.5.60 ENGLISH Setup control ncstudio v55601 english setup work
Restart your computer after the software installation finishes. Windows should detect the new hardware; choose "Auto-install the driver" to complete the connection between the software and the PCI card. 3. Essential Parameter Configuration Connect the data cable from the PCI card
Once the hardware is in place, you can proceed with the English software installation. These are often password-protected; the default password is
During the installation wizard, select English to ensure the interface is properly localized.
Yes. Servo alarm signal. Yes. Servo enable signal. Yes. Extended Board (may vary with type of extended board) Servo cable. Yes. Z- Control Ncstudio V5.5.60-1 ENGLISH Setup - Facebook
Power off your computer, open the casing, and firmly insert the NCStudio PCI card into an available PCI expansion slot. Secure it with the locknut to prevent any movement during operation.