Gemel Txshs User Manual ((better)) 〈95% SAFE〉

Provides visual feedback during operation and synchronization. Basic Operation Arming the Alarm

To activate the anti-theft function, press once. The following sequence occurs: Turn indicators flash twice. An alarm tone sounds twice (if programmed).

If the sync procedure fails, check the battery voltage. Low battery is the most common cause of pairing issues. Gemel TXSHS alarm operating advice needed - UKGSer Gemel Txshs User Manual

Remove the screws on the back of the case and separate the two halves. Carefully remove the old battery.

If you are transporting your bike on a trailer or train, you can disable the motion sensor while keeping the alarm armed: Arm the alarm by pressing . Press Button 1 again within the activation phase. An alarm tone sounds twice (if programmed)

The Gemel TXSHS is a radio remote control unit primarily used with BMW motorcycle anti-theft alarm systems, specifically the DWA 6 system . This guide provides a comprehensive manual for its operation, synchronization, and maintenance.

Press to deactivate the system. The indicators will flash once to confirm. Synchronization Procedure Gemel TXSHS alarm operating advice needed - UKGSer

Press both Button 1 and Button 2 simultaneously. Hold them for approximately 10 seconds until the LED on the remote stops flashing.