Http V515 Install Online

Open a web browser on the same device and enter http://v515install or http://v515install.com into the URL field. This will launch the camera's internal setup page. 4. Join Your Home Wi-Fi

With the camera online (solid green LED), you must link it to your security account: 1080p Indoor Wi-Fi Camera Installation Guide - Surety

Before starting the installation process, ensure you have the following ready: : Your camera and its included AC power adapter. http v515 install

Using a smartphone or computer, search for available Wi-Fi networks. Connect to the network named , where "XX" represents the last six characters of the camera's MAC address. 3. Access the Configuration Portal

Follow the on-screen instructions in the portal to scan for and select your home's 2.4 GHz Wi-Fi network. Enter your network password when prompted. The camera's LED will turn once it has successfully connected to the internet. 5. Add the Camera to Your Alarm.com Account Open a web browser on the same device

: An active Alarm.com account with a service package that supports video.

. This address allows users to connect their camera to a local 2.4 GHz Wi-Fi network when using Access Point (AP) mode. Pre-Installation Checklist Join Your Home Wi-Fi With the camera online

: A 2.4 GHz Wi-Fi connection. Note that the does not support 5 GHz networks.

Troubleshooting : If the LED is not blinking white after two minutes, hold the for about 6 seconds until it begins to blink. 2. Connect to the Camera's Temporary Wi-Fi