Before starting the installation, ensure the following conditions are met:
Electrical work must be performed by a qualified technician.
Open the motor hatch, loosen the clamping screws, and remove the protective cap. Attach the operator to the runner using the provided omega-shaped support brackets and hexagonal-headed screws. Lift the front part of the runner and
Lift the front part of the runner and secure the front brackets to the wall or ceiling. Ensure the runner is perfectly level before fixing the rear brackets firmly to the ceiling. Mechanical Stops:
The installation area must have sufficient clearance for both maintenance work and the manual release cord. Standard tools include a drill with masonry bits,
Standard tools include a drill with masonry bits, screwdrivers, a spirit level, and protective goggles.
The mechanical setup involves mounting the operator onto its guide rail (runner) and securing it to the garage structure. 3. Electrical Connections & Programming
Open the door to the desired height, position the opening stop against the carriage, and fix it in place. 3. Electrical Connections & Programming