!!link!! — Mks Astron 2l Manual
According to the technical manual, setup follows these specific steps: 1. Plumbing Connections Connect ultra-high purity (UHP) Oxygen. Gas Outlet: Use stainless steel compression fittings.
Connect the "Cooling In" and "Cooling Out" ports. Use deionized (DI) water or chilled process water. 2. Electrical Wiring
If the unit shuts down unexpectedly, check your cooling water temperature and flow rate. Are you dealing with a specific error code ? Do you need help integrating it with a PLC? mks astron 2l manual
The Astron 2L (and its sibling, the Astroni) uses a silent corona discharge to convert oxygen into high-concentration ozone. Up to 2 liters per minute (Lpm).
The chassis must be grounded to prevent static discharge. 🚀 Installation & Setup According to the technical manual, setup follows these
Connect the primary AC power source (refer to your specific model label for voltage requirements).
Run oxygen through the cell for 5 minutes to clear moisture. Connect the "Cooling In" and "Cooling Out" ports
Ensure all downstream tubing is ozone-compatible (e.g., Teflon/PFA, 316L Stainless Steel).