Press and hold the Volume Down + Lock (Power) keys (some versions may require holding 1 + 3 or Volume Down + Lock + Camera ).

Wait for the progress bar to finish. A green message indicates a successful flash. Disconnect the phone, reinsert the battery, and power it on. Note that the first boot may take several minutes. Common Troubleshooting How To Flash Stock Firmware For Any Samsung Phones

Install the Samsung USB Drivers or the ST-Ericsson Full Speed DFU drivers (often bundled with the flash tool) so your PC can recognize the device in download mode.

Power off the phone and remove the battery for 5 seconds, then reinsert it.

Before starting, ensure you have the following components ready:

In the tool, set the to LSI6410 and Port to USB0 . Click Start or Start USB1 to put the tool in standby mode.

A compatible firmware package for your region, typically including files like APPS.BIN , Rsrc_C3322.rc1 , and FactoryFs_C3322.ffs .

Right-click Flash_loader_7.4.7_SSG_v0.1_Lite.exe and select .

Click and browse to select the C3322_LAKOTA_Setting_v00.mdl configuration file found in the tool's directory. 2. Loading the Firmware Files

Load the following files into their respective slots in the tool: