Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller Please Try Adding 39d Megaraid N 39 Extra Quality Link -

This happens because the operating system sees a (the RAID array), but smartctl needs to talk directly to the physical disks hidden behind the controller. The Solution: Using the -d megaraid,N Flag

Once you have the ID, run the command against the controller's device node (usually /dev/sda or /dev/bus/0 ). Cannot get smartctl working - Unix & Linux Stack Exchange This happens because the operating system sees a

Fix: smartctl "Open Device Failed" on Dell or MegaRAID Controllers If your disk is in slot 1 and has a DID of 11 , then 2

: Locate the DID column in the "Drive Information" table. If your disk is in slot 1 and has a DID of 11 , then 2. Run the Correct smartctl Command Use the storcli (or older MegaCli ) utility

When running smartctl on a Dell PowerEdge server or any system using a MegaRAID (LSI/Broadcom) controller, you often encounter this error: Smartctl open device: /dev/sda failed: Dell or MegaRAID controller, please try adding '-d megaraid,N' .

You cannot guess this number, as it doesn't always start at 0. Use the storcli (or older MegaCli ) utility to find the (Device ID). Command : sudo storcli /c0 /eall /sall show

To bypass the virtual layer, you must tell smartctl which specific physical disk you want to inspect by providing its (represented as 1. Find the Physical Device ID (