Tool Unlock Bootloader | Sp Flash

Install the MTK drivers. If you are on Windows 10 or 11, you may need to disable "Driver Signature Enforcement" in the recovery settings to ensure the VCOM drivers install correctly. Step 2: Bypass MediaTek Secure Boot

If SP Flash Tool returns a "BROM Error," it usually means the drivers are not communicating or the Auth Bypass failed. Always ensure you are using the correct scatter file for your specific chipset; using the wrong file can lead to a hard brick.

With the addresses entered, click the "Start" button in SP Flash Tool. Reconnect your device (ensure the Auth Bypass is still active). The process takes only a few seconds. A green checkmark or a "Format OK" window will appear, indicating the configuration partition has been modified to an unlocked state. Step 5: Verify the Bootloader Status sp flash tool unlock bootloader

Navigate to the "Format" tab and select "Manual Format Flash." You will need to input specific hex addresses for the unlock partition. These addresses vary by device. You can find them by opening your scatter file in a text editor and searching for the "partition_name: seccfg" or "unlock" section. Copy the linear_start_addr and the partition_size into the corresponding fields in SP Flash Tool. Step 4: Execute the Unlock

If you share these details, I can find the exact hex addresses or scatter files you need. Install the MTK drivers

Open flash_tool.exe from your extracted folder. In the "Download" tab, click on "Choose" next to the Scatter-loading File and select the scatter text file from your device's firmware folder.

Once the tool says "Bypass Success," your device is ready to accept commands from SP Flash Tool without needing a server-side handshake. Step 3: Configure SP Flash Tool Always ensure you are using the correct scatter

Battery level maintained above 50% to prevent power failure during the flash. Step 1: Prepare the SP Flash Tool Environment

First, download the latest version of SP Flash Tool and extract the contents to a folder on your desktop. You will also need the "Auth Bypass Tool." Modern MediaTek chips use a secure boot architecture that blocks SP Flash Tool from communicating with the device without an authorized account. An Auth Bypass tool mimics this authorization locally.

To verify through software, enable "Developer Options" in your settings, then check the status of "OEM Unlocking." Alternatively, connect the device in Fastboot mode and run the command fastboot getvar unlocked from your PC terminal. Troubleshooting and Safety