: Prepare the cable entry point on the mounting surface. Ensure the cable is fed through the waterproof grommet or sealant provided with the unit.
: Features a dedicated Request to Exit (RTE) input and an open collector output for controlling door relays or strikes.
The TS1162 connects directly to the Challenger system’s LAN. ts1162 installation manual exclusive
The is a specialized access control and security keypad designed for durability in demanding environments. This guide provides an exclusive, detailed walkthrough for installing and configuring the Tecom TS1162 within a Challenger security system. Key Specifications and Features
: Use high-quality twisted-pair cable for the RS-485 connection to ensure signal integrity over long distances (up to 1.5 km). Step 2: Mounting the Unit : Prepare the cable entry point on the mounting surface
: Use appropriate screws or bolts for the surface material (e.g., masonry anchors for brick or self-tapping screws for metal). Tighten firmly but avoid over-tightening, which can warp the plastic housing. Step 3: Wiring and Connections
: Select a flat, solid, vertical surface. Mounting on uneven surfaces can cause the base to flex, potentially compromising the IP67 seal. The TS1162 connects directly to the Challenger system’s
: Verify the 3-LED status indicators correctly reflect the arming state of the assigned areas. Test the RTE input and the door strike output to ensure full functionality. Maintenance and Replacement