If the teeth are missing or the metal slider is cracked, a simple fix won't work. For Xaxbabyzip products, look for a replacement slider that matches the size engraved on the back of the original (usually a number like 3, 5, or 8).
Use pliers to snip off the small metal crimp at the very top of the zipper track. Slide off the old slider: Pull it all the way off the top.
The zipper pulls up, but the teeth don't stay closed. xaxbabyzip fix
Rub the tip of a #2 pencil over the teeth. The graphite acts as a dry lubricant.
Safety is the priority here, especially with baby gear. Do not yank the pull tab. If the teeth are missing or the metal
Before you grab any tools, identify the specific problem. Most zipper issues fall into one of three categories: Fabric or thread is caught in the teeth.
Move the slider slightly up and down while pulling the fabric away. Slide off the old slider: Pull it all the way off the top
Only apply a tiny bit of pressure at a time. If you squeeze too hard, the slider won't move at all. When to Replace the Slider
In a pinch, a tiny dab of clear lip balm can do the trick, but use it sparingly to avoid staining the fabric. 3. Fixing Gapping Teeth
To prevent future "xaxbabyzip fix" emergencies, follow these simple care rules: